86100D DCA-X
Instrument
86100D
Availability:
Discontinued
86100D DCA-X
The 86100D DCA-X is documented in this help system with information about the front panel, GUI, and remote programming in Standard configuration. The 86100D can be operated in Standard or Legacy configuration. Standard is the default configuration, and you'll probably never need to switch configurations. To program the 86100D in Legacy configuration, use the commands that are documented in the 86100D A/B/C/D Programmer's Guide.
| Option | Description | Licensed Software |
|---|---|---|
| 86100D-STR | Standard Trigger. 3.2 GHz Bandwidth | |
| 86100D-ETR | Enhanced Trigger. 13 GHz Bandwidth, Pattern and Module Trigger | |
| 86100D-PTB | Internal Precision Timebase | |
| 86100D-090 | Removable hard drive | |
| 86100D-092 | Standard instrument non-removable hard drive | |
| 86100D-GPI | GPIB Card Interface | |
| 86100D-GPN | No GPIB Card Interface | |
| 86100D-061 | MATLAB. Basic Digital Analysis Package | |
| 86100D-062 | MATLAB. Standard Digital Analysis Package | |
| 86100D-AFP | One-slot filler panel (86101-60017). Width of standard module, for example 86112A. | |
| 86100D-AX4 | Rack Mount Flange Kit | |
| 86100D-AXE | Rack Mount Flange Kit with Handles |
|
|
Standard is the 86100D's default configuration at start up. It is also the recommended and default configuration when FlexDCA is running on a PC. Standard configuration allows you to use the new one-slot mini modules and TDR/TDT mode. Many of the 86100D's two-slot modules are also supported. Be aware that when the 86100D is turned on it automatically starts in the configuration mode that was active when the instrument was last turned off. If this happens, you can return the FlexDCA GUI on the 86100D by clicking Apps > FlexDCA. |
|
Legacy configuration supports some features that are unavailable in Standard configuration. For example, Legacy configuration supports RZ eye measurements and all 86100D standard two-slot modules (but not the new one-slot mini modules). However, extended modules, simulated modules, waveform signal processing, and Jitter Spectrum Analysis and Clock Recovery Emulation are unavailable. To place the 86100D in Legacy configuration, click Apps > Legacy UI. To return to Standard configuration, click Apps > FlexDCA. |
| Feature | Configuration | |
|---|---|---|
| Standard | Legacy | |
| 86100D Graphical User Interface | ||
 FlexDCA |
♦ | |
 Classic |
♦ | |
| 86100D Programming | ||
| Via FlexDCA SCPI Commands | ♦ | |
| Via Legacy 86100D SCPI Commands | ♦ | |
| Remote Connection | ||
| Telnet | ♦ | |
| Sockets | ♦ | |
| HiSLIP | ♦ | |
| VXI-11 | ♦ | |
| GPIB | ♦ | ♦ |
| Module Types | ||
 Mini Modules |
♦ | |
 Two-Slot Modules |
♦ (reduced set) |
♦ (full set) |
| Internal 86100D Modules | ||
| Slots 1, 2, 3, 4 Reserved | ♦ | ♦ |
| Slots 1, 2, 3, 4 Available | ||
| Extended Modules | ||
| Slots 1, 2, 3, 4 Available | ||
| Slots 5, 6, 7, 8 Available | ♦ | |
| Simulated Modules | ♦ | |
 N1090A DCA-M Single Optical Channel Sampling Oscilloscope |
♦ | |
 N4877A CDRExternal Instrument |
♦ | |
| Calibration | ||
| Module (Vertical, Clock Recovery, Precision Timebase) | ♦ | ♦ |
| Dark (Extinction Ratio) | ♦ | ♦ |
| Optical (O/E) | ♦ | |
| Horizontal Skew | ♦ | ♦ |
| Probe | ♦ | ♦ |
| Other | ||
| Waveform Signal Processing | ♦ | |
| Jitter Spectrum Analysis and Clock Recovery Emulation (JSA) | ♦ | |
| DCA-X Applications | ♦ | |
| Differential Deskew Adjust | ♦ | ♦ |
| Fixture Deskew Adjust | ♦ | |
| Probe Setup | ♦ | ♦ |
| SIRC (System Impulse Response Correction) | ♦ | |
| Undo, Redo, and History | ♦ | |
| TDR Measurements | ♦ | ♦ |
| RZ Eye Measurements | ♦ | |
| Graphical NRZ Mask editor | ♦ | |
| Jitter Mode Frequency Results | ♦ | |
| Jitter Mode SRJ Spectrum | ♦ | |
| Jitter Mode PJ Waveforms | ♦ | |
| MATLAB filters and measurements | ♦ | |
| External trigger scaling | ♦ | |
| Gated Trigger | ♦ | |
| Printing | ♦ | |
| Waveform labels | ♦ | ♦ |
Supplied 86100D Accessories
The product's shipping list shows the accessories supplied with the 86100D. The following list shows some of the items that may be on the shipping list. The information on your actual shipping list is more accurate an should supersede the information in this list.
- 86100D DCA-X documentation CD. This CD includes the Quick Start Guide and Programmer's Guide.
- Mouse
- Keyboard
- DCA-X front colver (N1000-40008)
- Power cord for country of destination
In the following tables, the terms (m) and (f) indicate the type of center contact, male or female respectively.
1.85 mm and 2.4 mm connectors are mechanically compatible.
2.92 mm and 3.5 mm connectors are mechanically compatible.
| Type (from) | Type (to) | Model | Return Loss1 | Repeatability1,2 (Typically Better Than) |
|---|---|---|---|---|
| 2.92 mm Adapters | ||||
| 2.92 mm (f) | 2.92 mm (f) | 1250-4105 | — | — |
| 3.5 mm Adapters | ||||
| APC 3.5 mm (f) | APC 3.5 mm (f) | 5061-5311 | — | — |
| SMA Adapters | ||||
| SMA (f) | SMA (f) | 1250-1158 | — | — |
| SMA (m) | BNC (f) | 1250-1200 | — | — |
| 1.85 mm Adapters | ||||
| 1.85 mm (m) | 1.85 mm (m) | 5065-9811 | — | — |
| 1.85 mm (m) | 1.85 mm (f) | 5065-9839 | — | — |
| 1.85 mm (f) | 1.85 mm (f) | 85058-60114 | — | — |
| 2.4 mm Adapters | ||||
| 2.4 mm (m) | 2.4 mm (m) | 11900A | ≥32 (dc to 26.5 GHz) | −50 dB |
| 2.4 mm (f) | 2.4 mm (f) | 11900B | ≥25 (26.5 to 40 GHz) | −45 dB |
| 2.4 mm (m) | 2.4 mm (f) | 11900C | ≥20 (40 to 50 GHz) | −40 dB |
| 2.4 mm (m) | APC 3.5 (m) | 11901A | ≥32 (dc to 26.5 GHz) | −45 dB |
| 2.4 mm (f) | APC 3.5 (f) | 11901B | ≥28 (20 to 26.5 GHz) | −45 dB |
| 2.4 mm (m) | APC 3.5 (f) | 11901C | ≥28 (20 to 26.5 GHz) | −45 dB |
| 2.4 mm (f) | APC 3.5 (m) | 11901D | ≥28 (20 to 26.5 GHz) | −45 dB |
| 2.4 mm (m) | APC 7 | 11902A | ≥30 (dc to 18 GHz) | −50 dB |
| 2.4 mm (f) | APC 7 | 11902B | ≥30 (dc to 18 GHz) | −50 dB |
| 2.4 mm (m) | Type-N (m) | 11903A | ≥28 (dc to 18 GHz) | −48 dB |
| 2.4 mm (f) | Type-N (f) | 11903B | ≥28 (dc to 18 GHz) | −48 dB |
| 2.4 mm (m) | Type-N (f) | 11903C | ≥28 (dc to 18 GHz) | −48 dB |
| 2.4 mm (f) | Type-N (m) | 11903D | ≥28 (dc to 18 GHz) | −48 dB |
| 2.4 mm (m) | K 2.92 (m) | 11904A | ≥24 (dc to 40 GHz) | −40 dB |
| 2.4 mm (f) | K 2.92 (f) | 11904B | ≥24 (dc to 40 GHz) | −40 dB |
| 2.4 mm (m) | K 2.92 (f) | 11904C | ≥24 (dc to 40 GHz) | −40 dB |
| 2.4 mm (f) | K 2.92 (m) | 11904D | ≥24 (dc to 40 GHz) | −40 dB |
| 1 At the 2.4 mm port only. | ||||
| 2 Repeatability equals 20 Log |ΔΓ| where |ΔΓ|= |Γm1 − Γm2|. This is the difference between two measurements Γm1 and Γm2 before and after one disconnect/connect cycle. Repeatability depends upon proper torque and pin-depth. | ||||
| Type | Sex | Model | Electrical Specifications | Repeatability1 (Typically Better Than) |
|---|---|---|---|---|
| TDR Calibration Kit | — | N1024A/B | — | — |
| 2.4 mm | ||||
| 2.4 mm short | (m) | 85140A | At 50 GHz, 6° from nominal2,3 | −50 dB |
| 2.4 mm short | (f) | 85140B | At 50 GHz, 6° from nominal2,3 | −50 dB |
| 2.4 mm short | (m) | 85141A | At 50 GHz, 6° from nominal3,4 | −44 dB |
| 2.4 mm short | (f) | 85141B | At 50 GHz, 6° from nominal3,4 | −44 dB |
| 2.4 mm 50Ω Termination | (m) | 85138A | ≥30 dB (dc to 26.5 GHz) ≥25 dB (26.5 to 40 GHz) ≥20 dB (40 to 50 GHz) |
−40 dB |
| 2.4 mm 50Ω Termination | (f) | 85138B | ≥30 dB (dc to 26.5 GHz) ≥25 dB (26.5 to 40 GHz) ≥20 dB (40 to 50 GHz) |
−40 dB |
| SMA | ||||
| SMA short | (f) | 1250-2152 | — | — |
| SMA 50Ω Termination | (m) | 1810-0118 | — | — |
| SMA 50Ω Termination | (f) | 1250-2151 | — | — |
| 1 Repeatability equals 20 Log |ΔΓ| where |ΔΓ|= |Γm1 − Γm2|. This is the difference between two measurements Γm1 and Γm2 before and after one disconnect/connect cycle. Repeatability depends upon proper torque and pin-depth. | ||||
| 2 This specification applies to the location of the effective shorting plane. | ||||
| 3 Nominal, in this case, is the center of the distribution of all parts manufactured over time. | ||||
| 4 The phase shift of any Keysight 85141A/B open relative to any Keysight 85140A/B short is 180° ± 12°. | ||||
| Connector Type | Torque (±0.5 lb inch) |
Torque Wrench Part Number | Pin Depth (male or female) |
Connector Gage Kit Part Number | Protection End Cap Part Number |
|---|---|---|---|---|---|
| 2.4 mm | 5 lb in (57 N-cm) |
8710-1582, 5/16" open end (1.85 mm and 2.4 mm connectors) |
— | — | — |
| 2.4 mm | 8 lb in (90 N-cm) |
8710-1765, 5/16" open end (1.85 mm and 2.4 mm connectors) |
0 to 0.0015 inch (0 to 0.038 mm) |
85056-60018 (m) 85056-60017 (f) |
1401-0202(f) 1401-0095 (m) |
| 3.5 mm | 8 lb in (90 N-cm) |
8710-1765, 5/16" open end (3.5 mm connectors) |
0 to 0.002 inch (0 to 0.05 mm) |
85052-60042 (m) 85052-60043 (f) |
1401-0202(f) 1401-0208 (m) |
| Item | Description |
|---|---|
| 81000AI | Diamond HMS-10 Connector Adapter |
| 08154-44101 | HMS-10 dust cap |
| 81000FI | FC/PC/SPC/APC Connector Adapter |
| 81000KI | SC Connector Adapter |
| 81000SI | DIN Connector Adapter |
| 81000VI | ST Connector Adapter |
| Item | Description |
|---|---|
| Cables | |
| N4910-61601 | Matched cable pair, 2.4 mm (m) to 2.4 mm (m), 60 cm (24 in) |
| 86108-60050 | Matched cable pair, 2.92 mm (m) to 2.92 mm (m), 50 cm (20 in) |
| 86118-60006 | Semi-rigid cable, 1.85 mm (m) to 1.85 mm (m), 15 cm (6 in) |
| 8120-4948 | Coaxial cable, SMA (m-m) |
| DC Blocks | |
| N9398G | 1.85 mm DC block (m)-(f), 16V, 700 kHz to 67 GHz |
| N9398F | 2.4 mm DC block (m)-(f), 16V, 50 kHz to 50 GHz |
| N9398C | 3.5 mm DC block (m)-(f), 16V, 50 kHz to 26 GHz |
| Power Splitters | |
| 11667B | DC to 26.5 GHz, APC 3.5 mm |
| 11667C | DC to 50 GHz, 2.4 mm |
| Attenuators | |
| 8493C–003 | Two 3.5 mm 3 dB attenuators |
| 8493C–006 | Two 3.5 mm 6 dB attenuators |
| 8493C–010 | Two 3.5 mm 10 dB attenuators |
| 8493C–020 | Two 3.5 mm 20 dB attenuators |
| 33340C/020 | 20 dB attenuator, APC 3.5 mm (f-m) |
| Other | |
| 86101-60017 | One-slot filler panel. Width of mini module, for example N1045A. When replacing a standard-width module, for example an 86112A, order two one-slot filler panels. |
| 10086A | ECL Terminator |
| 11898A | Plug-in Module Remote/Extender |
| 11982A | High-Speed Lightwave Receiver |
| 54008A | 24 ns Delay Line |
| 83440B/C/D | Optical-to-Electrical Converters (6/20/34 GHz) |
| 83446A | Lightwave Clock and Data Receiver |
| 83480A-K16 | Switch Matrix |
| 83480A-K17 | RIMM Fixture |
| N4688N | External CD-RW drive |
| N9355CK01 | DC coupled limiter |
| Item | Description |
|---|---|
| N5477A | Sampling Oscilloscope Adapter for InfiniiMax III probing system (N2800A-series) |
| N2800A | 16 GHz InfiniiMax III probe |
| N2801A | 20 GHz InfiniiMax III probe |
| N2802A | 25 GHz InfiniiMax III probe |
| N2803A | 30 GHz InfiniiMax III probe |
| N1022B | Active Probe Adapter |
| N1025A | 1 GHz Active Differential Probe |
| N1020A | 6 GHz TDR Probe Kit (passive) |
| 1169A | 12 GHz InfiniiMax active probe |
| 1168A | 10 GHz InfiniiMax active probe |
| 1158A | 4 GHz active probe |
| 1157A | 2.5 GHz active probe |
| 1156A | 1.5 GHz active probe |
| 1152A | 2.5 GHz active probe |
| 1134A | 7 GHz InfiniiMax active probe |
| 1132A | 5 GHz InfiniiMax active probe |
| 1131A | 3.5 GHz InfiniiMax active probe |
| 54006A | 6 GHz Resistive Divider Probe Kit |
| 54701A | 2.5 GHz Active Probe |
| Item | Description |
|---|---|
| 9300-0797 | Static control mat 0.6 m x 1.2 m (2 ft x 4 ft) and 4.6 cm (15 ft) ground wire |
| 9300-0980 | Wrist strap cord - 1.5 m (5 ft) |
| 9300-1367 | Wrist strap, adjustable, without cord. |
| 9300-1126 | Heel strap |